GREEN-FILTER Brand Cross Reference kubota Oil filter

How to Remove a Kubota Tractor kubota oil filter

Kubota's B and L tractors both use a cylinder-shaped kubota oil filter, which is a  kubota oil filter. It is a transparent container that holds fuel. Fuel flows from the fuel tank to the  kubota oil filter. As fuel passes through the filter bowl, it circulates through the filter screen inside, which then filters out all particulate deposits and other impurities. Clean fuel flows from the  kubota oil filter to the fuel injector. Every 150-200 hours, the cylinder filter needs to be replaced.

Step 1

Park the kubota  oil filter tractor in an area with plenty of ventilation. Make sure that the surface is level.

Step 2

Turn the engine off and engage the transmission, so the tractor will not roll.

Step 3

Locate the kubota oil filter bowl on the front of the Kubota tractor. The kubota  oil filter bowl is clear, with a kubota  oil filter mounted inside of it. If the kubota oil filter bowl has a fuel valve on the top of the bowl assembly, turn the valve to the "Off" position.

Step 4

Wrap the kubota oil filter strap wrench around the bowl in a counterclockwise direction. Slowly turn the kubota oil filter bowl counterclockwise until the bowl loosens. Then, finish unscrewing the bowl with your hand.

Step 5

Place the bowl on the ground. You can now access the kubota oil filter. Pull the kubota oil filter straight down from the bottom of the kubota oil filter housing. Discard the old kubota oil filter into the drip pan.

where is the kubota oil filter on a kubota tractor

The kubota oil filter needs to be replaced regularly. Many friends do not know where the kubota oil filter is located. Let me introduce it to you. It is understood that there are two main installation positions for kubota oil filters of common models:

1. External kubota oil filter

The external kubota oil filter is generally installed at the oil pipe connection of the vehicle chassis. When looking for the kubota oil filter, it is generally found on the outside first. For the fuel tank, there is a kubota oil filter similar to a metal can. If it is external, it must be seen on the fuel supply pipe.

2. Built-in kubota oil filter

If it is not found on the outside, it is built into the fuel tank. The built-in gasoline filter is generally installed together with the gasoline pump and installed in the fuel tank.

2. Is there any direction requirement when installing the kubota oil filter?

When installing the kubota oil filter, one thing that needs to be paid special attention to is that the installation of the kubota oil filter has a direction requirement. Generally, there will be an installation direction on the filter. One has an arrow, and the arrow is facing the direction of the engine. The second is that there are English letters on the filter, IN means in, and OUT means out.

3. What will happen if the kubota oil filter is reversed?

The filter core of the kubota oil filter is completely closed at the end close to the fuel inlet. Under normal circumstances, the fuel cannot enter from the bottom of the filter core, but can only flow to the side of the filter material and enter from the outside. The top of the filter core is also closed, and the filtered fuel can only flow out from the central pipe.

If it is installed in reverse, the fuel entering the kubota oil filter will flow from the center of the filter material to the outside. There is no corresponding support for the outside of the filter core, so the structure will be damaged after a period of use, resulting in damage to the kubota oil filter. Life expectancy is severely shortened.

Generally speaking, if the kubota oil filter is installed upside down, it will have no effect at first, and the vehicle can start normally, but after a long time of use, the kubota oil filter will fail, which will gradually affect the power performance of the engine, so Everyone must pay attention to the correct installation direction when installing.

Kubota HHTA0-59900 oil filters cross reference

●Baldwin BT9358

●HIFI-FILTER SH60367

protect your engine, keep your oil clean and remove contaminants from your engine oilwith dependable, high performance lubefilters from Green Filters.

Providing a complete line of Donaldson's OEM quality oil flters for a full range of diesel engines, you can come to Green in theconfidence that you'll find the right, high quality lube filters for any application.

we also provide premium quality Donaldson Bluerw filters - a range of high performancen addition to standard life oil filters.

filters designed to last longer, and ideal for extending the service intervals on your equipment.

To locate the rioht replacement filters for your application, use our part search facility, search by flter attrbutes, or browsethrough our lube filter assemblies and accessories catalogue today. Alternatively, please feel free to call a member of our teamon 01482 711259, who'll be happy to help you find the filtration components you're looking for.